Surplus & obsolete wireUtility, plant and contractor lots

Glynn County · Coastal Georgia and Savannah

We buy wire and cable in Brunswick and Glynn County

The Port of Brunswick loads and unloads vehicles at Colonel's Island, and the town behind it works pulp, shrimp and boats. Each of those trades leaves cable behind.

  • Glynn County
  • Port and pulp mill
  • Marine trades
  • Colonel's Island Terminal handles vehicle and machinery cargo
  • Georgia-Pacific's Brunswick Cellulose mill operates in the city
  • US-17 and I-95 connect Glynn County to the Florida line
A row of black reels on timber bearers along a gravel drive, bare trees behind
Black reels along a gravel drive — outdoor storage in coastal humidity.

Sell your wire

Tell us what you have

Wire type, quantity, city and access. That is enough for a first review.

No fee and no obligation. Prefer to talk? 614-715-3047 or saleselectricalbuyers@gmail.com

01Local market

Selling a lot in Brunswick

Brunswick's electrical work divides neatly. The port side is a vehicle terminal: processing buildings, lighting, rail loading and wash-down areas, all rebuilt as the cargo mix changes. The mill side is continuous process, where motors, pumps and instrument loops are replaced on a maintenance cycle and the cable goes with them. The waterfront side is small and practical: boatyards, docks, cold storage and a shrimp fleet that repairs its own gear.

There is also a demolition stream. The former Pinova pine chemicals plant, the old Hercules site on the north side, was shut down and taken apart, and site work of that kind releases cable, grounding conductor and bus. Add the hurricane exposure that comes with this coast and there is always salvaged service cable in the county. Condition matters more here than in middle Georgia because the humidity never stops.

02Industries

Where Glynn County cable comes from

01

Vehicle terminal and port work

Colonel's Island runs processing buildings, lighting and rail loading. Reconfigurations release feeder, tray and control cable, and lighting changes leave part reels of THHN.

02

Pulp and paper

The Brunswick Cellulose mill is a continuous operation with pumps, digesters and paper machines. Motor and instrument work releases medium voltage feeder, shielded instrument cable and control cable.

03

Marine trades and the fleet

Boatyards, docks and cold storage run on shore power, welding lead and pump cable. Dockside repairs produce short lengths of SOOW, submersible pump cable and service entrance.

04Logistics

Pickup and access around Brunswick

Port traffic is booked, not improvised. A truck going onto a terminal needs an appointment and a driver who holds the right credential, and the same discipline applies at the mill, where contractor orientation comes before anyone walks onto the site.

The rest of the county is bridge and marsh country. Deliveries to St. Simons and Jekyll Island cross causeways, and a long trailer on a causeway approach is a planning question. In town, the streets around the old grid are narrow, and a reel that has to come out of a boat shed may need a smaller truck and a second trip.

05Nearby

Nearby coverage

06Questions

Brunswick wire buying questions

Do you buy cable from the vehicle terminal operations?

Yes, when the material has been released. Terminal property has its own access rules, so the first step is a written release from the operator rather than a site visit.

Is mill cable from a pulp plant worth keeping?

Part of it. Medium voltage feeder that came out intact can be reusable. Instrument cable that has been in a wet process area often is not, and it should be described as scrap.

What about cable from a plant being dismantled?

Dismantling releases grounding conductor, bus and feeder in large quantities. It is reviewed on accessibility and condition, because cable cut out of a structure in short pieces loses most of its reuse case.

Do you cover St. Simons, Jekyll and Darien?

Yes. The islands and McIntosh County are covered, with the causeway route and the size of truck that can reach the site discussed before a date is set.

Send the Brunswick lot details

Cable family, footage, how the ends were sealed and what a truck has to cross to reach it. That is what a buyer works from.

Sell your wire

Send Us Your Reel List

A buyer reads the details and comes back with questions or an offer basis.

No fee and no obligation. Prefer to talk? 614-715-3047 or saleselectricalbuyers@gmail.com

Call 614-715-3047Sell Your Wire