Surplus & obsolete wireUtility, plant and contractor lots

Whitfield County · Northeast Georgia

We buy industrial cable in Dalton, Georgia: dye lines and tufting drives

Dalton makes carpet, and carpet making is a set of continuous processes that punish cable: yarn running through machines at speed, dye baths held at temperature, and latex lines that never stop.

  • Whitfield County
  • Carpet and floorcovering
  • I-75
  • Whitfield County sits on I-75 in the northwest corner of Georgia
  • Carpet tufting, dyeing, extrusion and backing are the county’s core industries
  • Floorcovering distribution warehouses line the interstate interchanges
Coloured reels and timber pallets inside a green steel warehouse
Reels and pallets inside a steel warehouse at a floorcovering plant.

Sell your wire

Tell us what you have

Wire type, quantity, city and access. That is enough for a first review.

No fee and no obligation. Prefer to talk? 614-715-3047 or saleselectricalbuyers@gmail.com

01Local market

Dye lines, tufting drives and extrusion

A tufting machine is a sewing machine the width of a room, with hundreds of needles driven at speed. Every drive, servo and encoder on it runs on cable that flexes continuously, and continuous-flex control cable is what fails first. When a machine is rebuilt, the old cable is usually cut out in a bundle and left in a pile, which is why a tufting lot is worth keeping together rather than tossing into mixed recovery.

Dyeing and finishing is the heat side. Dye becks, dryers and tenter frames hold temperature, so high-temperature lead appears around ovens and steam work, while pumps and drives run on VFD cable. Extrusion adds another layer: barrel heaters, water baths and winders with tension control, all of it wired with heat-resistant lead and instrument cable to thermocouples. Between tufting, dyeing, extrusion and the latex line, the county turns over a steady volume of drive and control cable.

02Industries

Where Whitfield County cable comes from

01

Tufting and weaving

Needle drives, servos and encoders run on continuous-flex control and servo lead. Rebuilt machines release bundles of flex cable that are still identifiable by print legend.

02

Dyeing and finishing

Dye becks, dryers and tenter frames use high-temperature lead, drive cable and instrument runs to temperature sensors. Oven rebuilds release the most heat-rated cable on site.

03

Extrusion and backing

Barrel heaters, quench and winders run on heat-resistant lead, drive cable and tension control wiring. Line changes leave feeder and control that is often barely used.

04Logistics

Moving reels in a carpet town

Dalton is built for this. Most plants and warehouses on the I-75 interchanges have docks, yard space and forklifts, and a full trailer is normal rather than exceptional. The constraint is scheduling against production, since a carpet line that stops costs money by the minute.

The older mill buildings closer to downtown are the exception, with tight aisles and low clearances. If the reels are in a plant that predates the interstate, ask about door height and floor loading before a trailer is booked.

05Nearby

Nearby coverage

06Questions

Dalton wire buying questions

Do you buy continuous-flex cable from tufting machines?

Yes. It is one of the most common lots in Dalton, and the flex rating and conductor count are what a buyer reads. Keep the bundle together and the lot stays identifiable.

Is high-temperature cable from dye lines and dryers of interest?

Yes. Silicone and fibreglass lead from ovens and tenter frames is reviewed on temperature rating and conductor condition, not on appearance.

Can you take a whole plant store rather than one machine?

Yes, and that is often the better lot. A store with tags, shelf labels and original packaging reviews faster than the same cable loose in a bin.

Do you cover Murray and Gordon counties?

Yes. Whitfield, Murray, Gordon, Catoosa and Walker counties are covered, and Dalton lots are often combined with Rome or Cartersville on one run.

Send the Dalton plant list

The machine or store the cable came from, the cable family, the footage and the dock. A buyer reads it and comes back with questions or an offer basis.

Sell your wire

Send Us Your Reel List

A buyer reads the details and comes back with questions or an offer basis.

No fee and no obligation. Prefer to talk? 614-715-3047 or saleselectricalbuyers@gmail.com

Call 614-715-3047Sell Your Wire