Hall County · Plant liquidation cable
We buy plant liquidation cable in Gainesville, Georgia
In a poultry plant the cable is in the electrical rooms, and the rooms cannot be emptied while the refrigeration is still running.
- Hall County
- Electrical rooms and MCCs
- Refrigeration circuits
01The electrical room holds the plant’s cable
The electrical room holds the plant’s cable
Processing floors are washed, and nothing electrical stays on them that does not have to. So the cable lives off the floor: motor control centers in a room behind a wall, feeders in conduit and tray above, and control wiring run back to a panel. That is where a liquidation lot actually comes from.
A walk-through that starts on the processing floor will find cord and little else. The material is in the rooms, and the person who can point at it is the maintenance electrician, not the plant manager.
Photograph the room, not one reel. An MCC lineup and the tray arrangement above it describe the plant better than any single reel does.
02What washdown leaves usable
What washdown leaves usable
Washdown attacks jackets, labels and steel in that order. Cable in a wet room loses its print first, which is why so much plant cable arrives unidentified. What survives is the cable that was specified for the environment: cross-linked polyethylene building wire, tray cable, rubber cord, and armored constructions where the plant expected water.
That means a Gainesville lot contains a lot of cord and a lot of tray cable, and comparatively little of the large feeder that dominates a paper mill. Sorting by family before the review is what makes the lot readable.
- Tray cable from above the processing lines
- Rubber cord and drops to equipment and wash stations
- Panel and MCC feeders in conduit
- Control and sensor runs back to the plant room
03Refrigeration is the constraint
Refrigeration is the constraint
An ammonia refrigeration system runs the plant, and its control and power circuits cannot be cut while it is live. That single fact sets the order of a liquidation: the system is decommissioned on its own schedule by its own contractor, and the electrical rooms cannot be cleared before it.
It is also a safety line. Nothing on a refrigeration circuit is touched until the system is proven down and the plant says so in writing, whatever the closing date says.
Ask for that date in writing rather than a verbal answer. A closing plant has several dates in play — last production, last shipment, system shutdown — and only one of them governs the electrical rooms.
04Deadlines and a stripped interior
Deadlines and a stripped interior
These buildings are usually bought to be used again for food, which means the interior is stripped to the structure and rebuilt to a sanitation standard. Nothing a previous operator installed survives the fit-out, including the cable.
That gives a firm date and a hard end to it. Material that has not left by the time the strip-out crew starts is gone, so the list should be made before the building changes hands rather than after.
A strip-out crew does not wait for a review. If the list has to be made in a week, say so — a short review beats a missed pickup.
05Related
06Questions
Gainesville questions
Do you buy cable while the plant is still operating?
Only material that has been released and is not part of a live system. Anything serving production or refrigeration waits until it is decommissioned.
Is unidentified wet-room cable of any use?
Yes, but it is reviewed on measured size and construction rather than on the tag. Cord and tray cable can often still be identified from a stripped end.
Who normally holds the cable in a poultry plant sale?
Usually the operator or the asset buyer, and sometimes the landlord where the lease covers fixed electrical work. Confirmation in writing comes before any material moves.
Send the plant room list
Which buildings are being cleared, whether refrigeration is still running, and what is already on the dock. Photographs of the MCC rooms and any reel stock set the scope.